X

Thank you for trying AMP!

We have no ad to show to you!

How to fix WiFi adapter not working in Windows PC

If your WiFi adapter is not working on your Windows PC, here are some steps you can take to try to fix the issue:

  1. Restart your PC and your WiFi router. Sometimes, a simple restart can fix connectivity issues.
  2. Check if the WiFi adapter is properly installed. Go to Device Manager (you can search for it in the Start menu) and look for the network adapter. If there is a yellow exclamation mark next to it, the driver might be outdated or corrupted. Try updating or reinstalling the driver.
  3. Try disabling and re-enabling the network adapter. Right-click on the adapter in Device Manager and select “Disable device”, then right-click again and select “Enable device”.
  4. Reset the TCP/IP stack. Open Command Prompt as an administrator and type the following commands: “netsh winsock reset” and “netsh int ip reset”.
  5. Check if the WiFi adapter is disabled in the Windows Network settings. Go to Settings > Network & Internet > Wi-Fi and make sure the adapter is enabled.
  6. Run the Windows Network troubleshooter. Go to Settings > Network & Internet > Status > Network troubleshooter and follow the prompts.
  7. If none of these solutions work, try using a different WiFi adapter or contacting your computer manufacturer for support.

Note that these steps are general suggestions and the specific solution may depend on the type of WiFi adapter and the cause of the issue.

How do I fix the Wi-Fi adapter on Windows?

If your Wi-Fi adapter is not working on Windows, here are some steps you can take to try to fix the issue:

  1. Restart your computer and your Wi-Fi router. Sometimes, a simple restart can fix connectivity issues.
  2. Check if the Wi-Fi adapter is properly installed. Go to Device Manager (you can search for it in the Start menu) and look for the network adapter. If there is a yellow exclamation mark next to it, the driver might be outdated or corrupted. Try updating or reinstalling the driver.
  3. Try disabling and re-enabling the network adapter. Right-click on the adapter in Device Manager and select “Disable device”, then right-click again and select “Enable device”.
  4. Reset the TCP/IP stack. Open Command Prompt as an administrator and type the following commands: “netsh winsock reset” and “netsh int ip reset”.
  5. Check if the Wi-Fi adapter is disabled in the Windows Network settings. Go to Settings > Network & Internet > Wi-Fi and make sure the adapter is enabled.
  6. Run the Windows Network troubleshooter. Go to Settings > Network & Internet > Status > Network troubleshooter and follow the prompts.
  7. If none of these solutions work, try using a different Wi-Fi adapter or contacting your computer manufacturer for support.

Note that these steps are general suggestions and the specific solution may depend on the type of Wi-Fi adapter and the cause of the issue.

What to do if Wi-Fi adapter is not working in Windows 10?

If your Wi-Fi adapter is not working in Windows 10, here are some steps you can try to fix the issue:

  1. Restart your computer and your Wi-Fi router. Sometimes, a simple restart can fix connectivity issues.
  2. Check if the Wi-Fi adapter is properly installed. Go to Device Manager (you can search for it in the Start menu) and look for the network adapter. If there is a yellow exclamation mark next to it, the driver might be outdated or corrupted. Try updating or reinstalling the driver.
  3. Try disabling and re-enabling the network adapter. Right-click on the adapter in Device Manager and select “Disable device”, then right-click again and select “Enable device”.
  4. Reset the TCP/IP stack. Open Command Prompt as an administrator and type the following commands: “netsh winsock reset” and “netsh int ip reset”.
  5. Check if the Wi-Fi adapter is disabled in the Windows Network settings. Go to Settings > Network & Internet > Wi-Fi and make sure the adapter is enabled.
  6. Run the Windows Network troubleshooter. Go to Settings > Network & Internet > Status > Network troubleshooter and follow the prompts.
  7. Check if your Wi-Fi adapter is compatible with Windows 10. Some older adapters may not be fully compatible with the latest version of Windows.
  8. Disable power saving mode for the Wi-Fi adapter. Go to Device Manager, find your Wi-Fi adapter, right-click on it and select “Properties”. In the Power Management tab, uncheck “Allow the computer to turn off this device to save power”.
  9. If none of these solutions work, try using a different Wi-Fi adapter or contacting your computer manufacturer for support.

Note that these steps are general suggestions and the specific solution may depend on the type of Wi-Fi adapter and the cause of the issue.

Categories: Tech News
admin: